How to maintain the vacuum sintering furnace

How to maintain the vacuum sintering furnace

Vacuum sintering furnace is widely used in ceramics, silicon carbide, carbide materials, electroplating mold material and vacuum sintering graphite purification processing, want to undertake maintenance in the use of vacuum sintering furnace, only to do maintenance can be used more for long.
1, equipment four distribution cabinets clean operations.
2, such as mesh belt for the thimble mesh belt, please use sand paper burnish thimble side, in order to prevent the scratch of cell, if it is a diagonal mesh belt, baking at low speed in the speed of 100 case, to remove organic matter.
3, such as tube infection, organic matter, please be careful with alcohol cotton swab or non-woven fabrics.
4, inside the cavity clean homework (needs pay attention to the porosity have without block).
5, organic rows and heat cleaning operation (including facility and equipment, as well as the equipment of oil cigarette case), please use the organic matter on the alcohol cleaning equipment, etc.
Sealing structure on 6, furnace, vacuum system and other components when disassembling, alcohol or gasoline clean and after dry, apply vacuum grease on it again.
7, the transmission is not allowed if there is a limit, control failure, screens etc. Phenomenon, should immediately stop, don't force, so as not to damage parts.
After 
8, vacuum sintering furnace, the furnace, furnace must remain below 66.5 LPA vacuum degree.
9, vacuum pump, valve, measuring instruments, thermal instrumentation, electrical components, such as accessories, must be in accordance with the technical specifications of the products use, repair and maintenance.
10, maintenance operation should be performed under the condition of without electricity. If under the condition of charged for repair, must by the professional maintenance personnel for repair, at the same time to ensure the absolute safety of person and equipment.
11, vacuum sintering furnace aluminum plate spot welding machine mechanical transmission parts should be lubricated periodically or oil changes and maintenance.